This is an HTML version of an attachment to the Official Information request 'Updated K Codes List'.

PROCEDURE – Land mobile radio communications 
K codes 
To ensure radio congestion is kept to a minimum, Fire Service personnel 
must transmit the appropriate K code message where possible. 
Status 
K0 not available 
K1 proceeding to incident 
K2 in attendance at incident  
K3 on RT outside normal turnout area  
K4 on RT inside normal turnout area 
K5 on RT available at incident 
K6 on telepager 
K7 at normal station 
K8 at residence (on phone) 
K9 off RT - state location 
K10 re-commissioning appliance 
KE unable to proceed (state reason) (spoken as Kay echo). 
Support services 
K11 (state service required, and if necessary, the reason) 
K11-1 police required – confidential. 
Intelligence 
K12 suspicious nature (deliberate with intent to cause damage). 
Appliance movement 
K22 is your appliance available for a further call? 
K22-1 appliance available to respond to a further call  
K22-2 have you any appliances that can be released? 
under the Official Information Act
K25 proceed to, and stand-by at (location) 
K25-1 appliance standing by awaiting instructions at (location) 
K26 appliance will be engaged at incident for (time) 
K26-1 appliance still engaged, no additional developments 
K28 appliance is to return to station (only to be used by mobilising centre) 
Released K28-1 return other or specific responding appliances. 
National Operations  
Page 3 of 6
M3-2 SOP LMR communications procedure December 2016 


PROCEDURE – Land mobile radio communications 
K codes 
Radio procedure 
continued 
K31 request permission to go off RT (fires and standbys) 
K32 on radio test – how do you receive? 
K33(1-5) radio test received satisfactorily (readability 1 to 5) 
K34 repeat your message 
K35 verify address of call  
K35-1 request map reference  
K36 contact communication centre by telephone 
K38 associate this officer to incident (state incident address) 
K39 re-transmit your current status (MSU or verbal). 
Incident ground command 
K41 fatality (indicate number with suffix) 
K42 fire suppressed, commencing overhaul 
K43 all available manpower fully utilised 
K44 command or control point established (OIC and location) 
K45 command responsibility change (state name). 
Stop messages 
K46-1 stop message – false alarm – good intent 
K46-2 stop message – false alarm – accidental  
K46-3 stop message – false alarm – defective apparatus 
K46-4 stop message – false alarm – malicious 
K46-5 stop message – alarm agent in attendance 
K46-6 stop message – nothing showing on indicator panel 
K47 stop message – message unchanged from SitRep 
K48 stop message – details to follow. 
under the Official Information Act
Trial evacuation 
K51 trial evacuation to be carried out at (state location) 
K52 (location) was a 111 call received from the premises 
K53 (location) evacuation successful. 
Arrival message 
Released K55 first appliance in attendance – special service incident 
K66 first appliance in attendance – non property fire 
K77 first appliance in attendance – nothing showing investigating further 
K88 first appliance in attendance – property fire apparently small  
K99 first appliance in attendance – property fire well involved. 
National Operations  
Page 4 of 6
M3-2 SOP LMR communications procedure December 2016 

Document Outline